| |
|
 |
This series of Frost Thermostat is suited for cooling and air conditioning systems and general applications that need a temperature not below a certain fixed safety value in air handling units,
domestic and industrial areas, commercial buildings and sport halls. It is extentsively used for frost protection on heat exchangers and hot-water registers for air conditioning and refrigeration systems. |
| |
| Features |
Temperature monitoring below a certain fixed safety value.
Self-control if capillary or power element are damaged. |
| Spec. |
Sensitive element: gas-filled copper element with bulb (1.8 m models) or
gas-filled copper coil element (3 or 6 m models)
Contacts: dust-tight microswitches with switching SPDT contacts (heat/cool)
Switch capacity: 15(8)A, 24-250 Vac
Range: -10 - +12ºC
Differentials: 1
Stage: 1
Reset:
FT1: Manual
FT2: Auto
Capillary length: 6m
Working temp.: -20 - +80ºC
Max bulb temp.: +150ºC
Humidity: 0-95% RH (non condensing)
Storage: -30 - +90ºC
Housing: cover polycarbonate, base polyamide
Size: 130 x 130 x 70 mm
Protection: IP54, class I
Weight: 450g
|
Order Code
|
| Order code | Description |
| FT1 | Anti-freeze thermostats, Manual reset |
| FT2 | Anti-freeze thermostats, Automatic reset |
|
|
|
|
